GSI Group 890-00584, Руководство по установке и настройке

Страница: 25 / 120

Chapter 3: Basic Connections
Figure 3-2 Example of a phone line seizure hookup
1 8
2 7
3 6
4 5
SURGE
PROTECT OR
TO ALL
PHONE LINES
TIP
TIP (GREEN or YELLOW)
RING
RING (RED or BLACK)
RJ31X
WALL J ACK
RJ31 PLUG – HOOK ON T OP
RJ31
PLUG
AGRI-ALERT
125 T OUCH
R T
R1
PHONE LINE
T1 R T
T1 R1
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
R1
(GREY or BLACK)
R
(RED)
T1
(BROWN or YELLOW)
T
(GREEN)
Mounting the Enclosures
Securely mounting the enclosures to the wall in the ideal location allows for an optimal use of the system
when navigating the menus.
Before You Begin
NOTICE
When using outdoor connections, mount the enclosure as close as possible to the
entry point of the wiring.
IMPORTANT: The enclosures must be mounted near an unswitched AC power outlet and a telephone
plug.
IMPORTANT: Mount the system into a wooden or metal frame. Do not mount the system directly into the
drywall
1. Using four of the eight 4.76 millimeters (0.1875 inch) screws, secure the main enclosure to the metal
or wooden frame on the wall.
2. Open the battery enclosure and remove the black screw caps covering the mounting holes of the bat-
tery enclosure.
3. Using the four remaining 4.76 millimeters (0.1875 inch) screws, secure the battery enclosure 114
millimeters (4.5 inch) away from the main enclosure.
4. Place the previously removed black screw caps on the screws used to mount the battery enclosure
to make the enclosure water tight. Add silicone caulking to completely seal the screws.
5. Verify that both enclosures open easily by pulling on the latch, or lock by pushing on the latch at the
bottom of the enclosures.
895-00677 Agri Alert 128 Touch 25