GSD Kleenair, Руководство по сборке и эксплуатации, Страница: 10 / 12

Page 10
Assembly Continued
9. Attach the other end of the 2’ x 6” flex hose to either side of the KLEENair hopper. Fasten
in place with 4-1/8—7” hose clamp (see figure 6). Attach the red tube cover onto the other
side of the hopper.
Figure 6
Note: It is recommended that there be a small bend in the flex hose between the blower and the
KLEENair. This helps keep the velocity of the screenings lower to maximize propeller life.
10. Attach the square-to-round adapter to the discharge on the blower using the two (2) small
self-taping screws provided. (see figure 7)
Figure 7