Grundig GWN48442STC, Руководство пользователя

Страница: 36 / 88

36
Draining remaining water and
cleaning the pump filter
The filter system in your machine
prevents solid items such as buttons,
coins and fabric fibers clogging the
pump impeller during discharge of
washing water. Thus, the water will
be discharged without any problem
and the service life of the pump will
extend.
If the machine fails to drain water,
the pump filter is clogged. Filter
must be cleaned whenever it is
clogged or in every 3 months. Water
must be drained off first to clean the
pump filter.
In addition, prior to transporting
the machine (e.g., when moving
to another house) and in case of
freezing of the water, water may have
to be drained completely.
A
WARNING: Foreign
substances left in the pump
filter may damage your
machine or may cause
noise problem.
A
WARNING:
If the product
is not in use, turn the tap
off, detach the supply hose
and drain the water inside
the machine against any
freezing possibility in the
region of installation.
A
WARNING:
After each use
close the supply hose tap of
the product.
In order to clean the dirty filter and
discharge the water:
• Unplug the machine to cut off the
supply power.
A
WARNING:
Temperature
of the water inside the
machine may rise up to
90 ºC. To avoid burning risk,
clean the filter after the
water in the machine cools
down.
• Open the filter cap.
• If the filter cap is composed of
two pieces, press the tab on the
filter cap downwards and pull the
piece out towards yourself.
C
You can remove the filter
cover by slightly pushing
downwards with a thin
plastic tipped tool, through
the gap above the filter
cover. Do not use metal
tipped tools to remove the
cover.
• Some of our products have
emergency draining hose and
some does not have. Follow the
steps below to discharge the
water.