Grundig GWN 39230 R, Руководство пользователя

Страница: 85 / 88

85
EN
There is detergent left on the laundry. (**)
• Excessive laundry was loaded in. >>>
Do not load the machine in excess.
• Wrong programme and temperature were selected. >>>
Select the proper
programme and temperature for the laundry to be washed.
• Wrong detergent was used. >>>
Select the proper detergent for the laundry to be
washed.
Too much foam forms in the machine. (**)
• Improper detergents for the washing machine are being used. >>>
Use
detergents appropriate for the washing machine.
• Excessive amount of detergent is used. >>>
Use only sufficient amount of
detergent.
• Detergent was stored under improper conditions. >>>
Store detergent in a closed
and dry location. Do not store in excessively hot places.
• Some meshed laundry such as tulle may foam too much because of their texture.
>>>
Use smaller amounts of detergent for this type of item.
• Detergent is put in the wrong compartment. >>>
Put the detergent in the correct
compartment.
• Softener is being taken early. >>>
There may be problem in the valves or in the
detergent dispenser. Call the Authorised Service Agent.
Foam is overflowing from the detergent drawer.
• Too much detergent is used. >>>
Mix 1 tablespoonful softener and ½ l water and
pour into the main wash compartment of the detergent drawer.
• Put detergent into the machine suitable for the programmes and maximum loads
indicated in the “Programme and consumption table”. When you use additional
chemicals (stain removers, bleachs and etc), reduce the amount of detergent.
Laundry remains wet at the end of the programme. (*)
• Excessive foam might have occurred and automatic foam absorption system
might have been activated due to too much detergent usage. >>>
Use
recommended amount of detergent.
* Machine does not switch to spinning step when the laundry is not evenly
distributed in the drum to prevent any damage to the machine and to its
surrounding environment. Laundry should be rearranged and re-spun.
** Regular drum cleaning might not be applied.>>>
Clean the drum regularly.
A
WARNING: If you cannot eliminate the problem although you follow the
instructions in this section, consult the dealer or the Authorised Service
Agent. Never try to repair a nonfunctional product yourself.