13
3.2
Activating the Camera
You are required to activate the camera first by setting a strong
password for it before you can use the camera.
Activation via Web Browser and Activation via Grundig IP-Finder Tool
are supported. We will take activation via Grundig IP-Finder Tool and
Activation via Web Browser as examples to introduce the camera
activation.
3.2.1
Activation via Web Browser
Steps:
1.
Power on the camera. Connect the camera to your computer or
the switch/router which your computer connects to.
2.
Input the IP address into the address bar of the web browser, and
press Enter to enter the activation interface.
Notes:
⚫
The default IP address of the camera is 192.168.1.100.
⚫
The computer and the camera should belong to the same
subnet.
⚫
For the camera enables the DHCP by default, you need to use
the Grundig IP-Finder Tool to search the IP address.