Grundig GTM 14120, Руководство пользователя

Страница: 12 / 55

12
3.4 Adjusting the legs
If your refrigerator is unbalanced;
You can balance your refrigerator
by turning its front legs as
illustrated in the figure. The corner
where the leg exists is lowered
when you turn in the direction of
black arrow and raised when you
turn in the opposite direction.
Taking help from someone to
slightly lift the refrigerator will
facilitate this process.
Installation (Under the coun-
ter)
•
Internal height of the counter
should be 820mm.
•
(!) Cookers or other heat
sources must not be placed
above the counter where the
appliance is installed under the
counter.
•
The mains wall socket plug
must be close to the right or left
hand side of the appliance.
•
Remove the top cover of the
appliance. There are 4 screws(2
pieces at the back, 2 pieces
below the front edge) that
should be removed. Fig. 1
•
Cut the part shown in the
picture and then remove it by
the help of pliers.
•
Place you appliance under the
counter and adjust the front
feets until its top touches to the
counter.
•
In order to use the product
under the counter, the distance
between the wall and the
reference indicated in the top
connection plastic must be
minimum 595 mm.
Fig. 2-3
•
Fix the appliance under the
counter by using 2 of the screws
that was removed from the top
cover.(Material of the counter
must be plastics or wood
based!)
Fig. 4