Grundig GSS STC 816, Инструкция по сборке

Страница: 13 / 37

- 13 - STC 816
4 i
nstallinG the head
-
end station
4.1 emC
reGul ations
(
e lectro m agnetic C ompatibilit y
)
To comply with the current EMC regulations, it is necessary to connect the lines
leading in and out of the head-end station (e.g. Cinch, RF) using standard ca-
ble terminals.
Fig. 8
• According to figure 8 insert the required number of standard cable termi-
nals in the openings provided in the front of the head-end station (fig. 2
5
,
page 10).
Tighten the nuts on the cable terminals until the teeth on the lock washers have
penetrated the exterior coating and a good connection is made between the
housing and the cable terminals.
—> To maintain compliance with the EMC regulations, the head-end sta-
tion must not be operated without the front cover.