Grundig GSS SMCIP 402 C, Инструкция по сборке

Страница: 38 / 42

- 38 - SMCIP 402 C/T
Ca
data PaCkets
In this menu you can adapt the size of the data packets, which are transmitted
to the CA module (depending on the CA module).
188
CA-MODE
• Use +/– buttons to set the size of the data packets (188/204 Bit).
—> AlphaCrypt modules use 204 bit datapackets, Neotion modules
188 bit.
• Press the MODE button.
–> The "PID monitoring" – " CA " main menu is activated.
Pid
monitoring
In this menu you can switch off the PID monitoring and call up a menu for the
settings of the CA module (dependent on the CA module).
PID Check Vid
CA
=>
—> If there is no CA module inserted, this menu has no function.
—> The factory default is video PID monitoring ("Vid"). Optionally all
PIDs can be monitored.
If particular PIDs are not descrambled the CA module is reset. Ad-
ditionally dropouts may occur if several stations are descrambled.
To prevent this the PID monitoring can be switched off.
• Use the +/– buttons to select …
– " off ", to switch off the PID monitoring,
– " Vid ", to monitor only video PIDs or
– " All ", to monitor all PIDs.
• Use the > button to activate the menu of the CA module.