Grundig GSS SID 162, Инструкция по сборке

Страница: 7 / 10

- 7 - SID 162
5 C
onneCting the
sat if
input distributor
5.1 C
onneCting the
hf
ConneCtions
• Connect the outputs E and F (page 5) to the appropriate inputs of the
modules.
u
sing one reCeption area
(
loop
-
through mode
)
• Connect input
D
of the SAT IF input distributor to one of the pre-installed
F terminals 4 in the rear wall of the head-end station using a HF cable
made on-site (length approx. 30 cm).
• Connect the loop-through output C to input B using a HF cable made on-
site (length approx. 30 cm).
4
D
C
B
u
sing t wo reCeption areas
• Connect inputs B and D of the SAT IF input distributor to the appropriate
pre-installed F terminals
4
in the rear wall of the head-end station using HF
cables made on-site (length approx. 30 cm).
• Terminate the loop-through output
C
with the terminator supplied.
4
D
C
B