Grundig GRND 6501, Руководство пользователя

Страница: 85 / 94

36
7 Maintenance and cleaning
B
WARNING:
Read the “Safety
Instructions” section first!
.
B
WARNING:
Unplug the
refrigerator before
cleaning
it.
•
Do not use sharp or abrasive
tools to clean the product. Do not
use materials such as household
cleaning agents, soap, detergents,
gas, gasoline, alcohol, wax, etc.
•
The dust shall be removed from
the ventilation grill on the rear
of the product at least once a
year (without opening the cover).
Cleaning shall be performed with a
dry cloth.
For Products With Water Fountain /
Ice Maker
•
If the water in the water tank has
waited for 2-3 weeks, it shall be
replaced.
•
The water tank and the
components of the water
fountain shall not be washed in
dishwashers.
•
Melt a teaspoonful of carbonate in
the water. Moisten a piece of cloth
in the water and wring out. Wipe
the device with this cloth and dry
off thoroughly.
•
Take care to keep water away
from the lamp's cover and other
electrical parts.
•
Clean the door with a damp cloth.
Remove all contents to remove the
door and body racks. Remove the
door racks by lifting them upwards.
Clean and dry the shelves, then
attach back in place by sliding from
above.
•
Do not use chlorinated water
or cleaning products on the
exterior surface and chrome-
coated parts of the product.
Chlorine will cause rust on such
metallic surfaces.
•
Do not use sharp and abrasive
tools, soap, house cleaning
materials, detergents, gas,
gasoline, varnish and similar
substances to prevent
deformation of the plastic part
and removal of prints on the
part. Use warm water and a soft
cloth for cleaning, and then dry
it.
•
On the products without a No-
Frost feature, water droplets
and icing up to a thickness
of a finger may occur on
the rear wall of the freezer
compartment. Do not clean,
and never apply oils or similar
materials.
•
Use a mildly dampened micro-
fiber cloth to clean the external
surface of the product. Sponges
and other types of cleaning
clothes may cause scratches.
•
To clean all removable
components during the
cleaning of the interior surface
of the product, wash these
components with a mild
solution consisting of soap,
water and carbonate. Wash and
dry thoroughly. Prevent contact
of water with illumination
components and the control
panel.