Grundig GIN 090, Руководство по установке

Страница: 29 / 168

Split-type room air conditioner / Installation Manual
29 / 56 EN
Strong wind
Wind Baffle
Strong wind
Strong wind
Fig. 6.2
Fig. 6.3
If the unit is frequently exposed to heavy rain or snow:
Build a shelter above the unit it to protect it from the rain or snow. Be careful not to obstruct air flow
around the unit.
If the unit is frequently exposed to salty air (seaside):
Use outdoor unit that is specially designed to resist corrosion.
Step 2: Install drain joint
Heat pump units require a drain joint. Before bolting the outdoor unit in place, you must install the
drain joint at the bottom of the unit. Note that there are two different types of drain joints depending
on the type of outdoor unit.
If the drain joint comes with a rubber seal (see Fig. 6.4 - A ), do the following:
1. Fit the rubber seal on the end of the drain joint that will connect to the outdoor unit.
2. Insert the drain joint into the hole in the base pan of the unit.
3. Rotate the drain joint 90° until it clicks in place facing the front of the unit.
4. Connect a drain hose extension (not included) to the drain joint to redirect water from the unit
during heating mode.
6 Outdoor unit installation