ENGLISH
13
CONNECTION AND PREPARATION
_______________________________________
Connecting an audio system with analogue
two-channel stereo sound
As an alternative to using the television's speakers, the sound can also be
played back through an audio system. This can improve audio playback.
1
Plug a standard cinch cable into the »
R AUDIO OUT L
« socket of the DVD
player and into the corresponding socket on the audio system.
Caution:
Do not connect the »
R AUDIO OUT L
« socket on the DVD player to the
PHONO (record player) input socket on the audio system.
Connecting the power cord
1
Plug the power cord into the wall socket.
Inserting batteries in the remote control
1
Open the battery compartment by pressing the snap-catch, and remove
the lid.
2
When inserting the batteries (Micro type, e.g. R03/AAA, 2 x 1.5 V), observe
the polarity marked on the battery compartment.
3
Close the battery compartment.
Note:
If the DVD player no longer reacts properly to remote control commands, the
batteries may be flat. Be sure to remove used batteries. The manufacturer
accepts no liability for damage resulting from leaking batteries.
Environmental note:
Batteries, including those which contain no heavy metal, may not be dis-
posed of with household waste. Please dispose of used batteries in an envi-
ronmentally sound manner. Find out about the legal regulations which apply
in your area.
EURO AV TV
S VIDEO OUT
R AUDIO OUT L
DIGITAL AUDIO OUT
VIDEO OUT
220-240 V
~
50/60 Hz 15 W
R
L
AUDIO
INPUT
S VIDEO OUT
R AUDIO OUT L
DIGITAL AUDIO OUT
VIDEO OUT
220-240 V
~
50/60 Hz 15 W
