Grundfos TP 100-160, Руководство по эксплуатации продукта

Страница: 23 / 52

Curve chart
s
TPE E-circulators
12
23
12. Curve charts
How to read the curve charts
Curve conditions
The guidelines below apply to the curves shown on the
following pages:
1. Tolerances to ISO 9906, Annex A.
2. The curves apply to the performance of
sin-
gle-phase pumps . For other versions, please see
the exact curves in WinCAPS or WebCAPS.
3. Measurements have been made with airless water
at a temperature of +68 °F (20 °C).
4. The curves apply to a kinematic viscosity of
1 St (1 mm
2
/s).
5. Due to the risk of pump overheating, the pumps
should not be used below the minimum flow rate
indicated by the
bold -faced curves.
Note: We do not recommend constant operation at
a flow rate below 10 %.
6. If the pumped liquid density and/or viscosity is
higher than that of water, it may be necessary to use
a motor with a higher performance.
7. Motor speed:
2-pole = 3400 RPM
4-pole = 1690 RPM
TM
02
55
53
21
02
0 10 20 30 40 50 Q [US GPM]
0
5
10
15
20
25
30
35
40
45
[ft]
H
0
2
4
6
8
10
12
14
[m]
H
TP 32
60 Hz
ISO 9906 Annex A
-160/2
-80/2
0 10 20 30 40 50 Q [US GPM]
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
[hp]
P2
0.0
0.1
0.2
0.3
0.4
0.5
[kW]
P2
-160/2
-80/2
0 10 20 30 40 50 Q [US GPM]
0
5
10
15
20
25
30
35
[ft]
NPSH
0
2
4
6
8
10
[m]
NPSH
-160/2
-80/2
0 10 20 30 40 50 Q [US GPM]
40
45
50
55
60
65
70
Eff
[%]
0 2 4 6 8 10 12 14 Q [m³/h]
-160/2
-80/2
Pump type and frequency.
QH curve for the individual
single-head pump.
The bold curve indicates the
recommended performance
range.
The power indicates pump
input power (P
2
)
The eta curve shows the pump efficiency
E-circulator.book Page 23 Friday, October 7, 2011 4:01 PM