English (GB)
21
Factory setting
User name: admin
Password:
admin
When user name and password have been entered, a Java
Runtime Environment application starts up in the CU 361,
provided that it has been installed on the computer in question.
If this is not the case, but the computer is connected to the
internet, then use the link on the screen to download and install
the Java Runtime Environment application.
Fig. 37
Display with link to Java Runtime Environment
The Java Runtime Environment application transfers the CU 361
user interface (including display and control panel) to the
computer screen. It is now possible to monitor and control the
CU 361 from the computer.
Fig. 38
Network setting
Change of network setting
When the connection to the web server of the CU 361 has been
established, it is possible to change the network setting.
Fig. 39
Change of network setting
1. Click the icon "Network admin".
2. Enter the changes.
3. Click [Submit] to enable the changes.
Change of password
Fig. 40
Change of password
1. Click the icon "Change password".
2. Enter the new password.
3. Click [Submit] to enable the new password.
16.2 GENIbus
When a GENIbus module is installed, it is possible to connect a
CU 361 to an external network. The connection can be
established via a GENIbus-based network or a network based on
another protocol via a gateway. See fig. 34.
For further information, contact Grundfos.
T
M
0
3
20
4
9
35
0
5
T
M
04
94
36
43
10
TM
03
20
50
35
05
TM
0
3
2
051
3
505
