English (GB)
17
15.3.5 Digital outputs (4.3.3)
Fig. 24
Digital outputs
This display shows the two digital outputs of the CU 361 and the
seven digital outputs of the IO 351B.
Standard configuration:
15.4 User-defined alarms (4.4)
Fig. 25
User-defined alarms
In this menu, it is possible to enable monitoring of the following
conditions:
•
Mains water valve open
•
Mains water flow detected
•
Feed pump running.
For each of the monitored conditions, a time limit can be set.
The time limit determines the delay between detection of the
condition and activation of the alarm.
15.5 Basic settings, CU 361 (4.5)
In this menu, the basic settings of the CU 361 can be made:
•
Activation of service language, English
•
Other settings related to CU 361
– Display language
– Units
– Date and time
– Password for "
Operation
" and "
Settings
" menus
– Ethernet
– GENIbus number
– Software status.
Fig. 26
Basic settings, CU 361
If the buttons are not touched for 15 minutes, the display will
return to the language selected at start-up or to the language
selected in display 4.5.1.
Di
s
p
la
y
_
4
.3.
3
DO1 (CU 361) [71]
Mains water valve open
DO2 (CU 361) [74]
Feed pump running
DO1 (IO 351B-41) [77]
Feed pump alarm
DO2 (IO 351B-41) [79]
Booster pump alarm
DO3 (IO 351B-41) [81]
High-water alarm in buffer tank
DO4 (IO 351B-41) [82]
Mains water valve open
DO5 (IO 351B-41) [84]
Level in collecting tank below alarm
level
DO6 (IO 351B-41) [86]
Water level above stop level
DO7 (IO 351B-41) [88]
No function
D
is
pl
ay_
4
.4
D
is
pl
a
y
_4
.5
Note
If the service language is selected, the symbol
is shown in the upper right corner of all displays.
