Grundfos RCME Series, Инструкция по установке и эксплуатации

Страница: 4 / 120

English (GB)
4
English (GB)
Installation and operating instructions
Original installation and operating instructions.
CONTENTS
Page
1. Symbols used in this document
2. Scope of these instructions
These installation and operating instructions apply to the
Grundfos RCME rainwater pumping system. For instructions not
mentioned specifically in this manual, see the installation and
operating instructions supplied with the SB feed pump.
3. Delivery and handling
The Grundfos RCME pressure-boosting unit, including all sub-
components, is delivered from factory on a wooden pallet
designed for transport by fork-lift truck or a similar vehicle.
4. Applications
The Grundfos RCME rainwater system is designed to supply
collected rainwater to toilets and laundries in large buildings such
as:
• shopping malls
• schools
• office buildings
• hospitals and nursing homes
• greenhouses and farms
• multi-family homes, housing complexes, etc.
1. Symbols used in this document 4
2. Scope of these instructions 4
3. Delivery and handling 4
4. Applications
4
5. Product description 5
5.1 Overview of standard system components 5
6. Identification
6
6.1 Nameplate
6
6.2 Type key 6
7. Mechanical installation
6
7.1 Location
6
7.2 Foundation 6
7.3 Pipework 7
7.4 Additional feed pump
7
7.5 Additional buffer tank 7
8. Electrical installation 7
8.1 Electrical connection 7
8.2 Motor protection 8
8.3 EMC-correct installation 8
9. Control panel
8
9.1 Display layout
9
10. Commissioning 9
10.1 Checks before first start-up 9
10.2 Startup
9
11. Menus 10
12.
Status
(1) 11
12.1
Electrical overview
(1.1)
11
12.2
Usage statistics
(1.2)
12
13.
Operation
(2) 12
14.
Alarm
(3)
12
14.1
Current alarms
(3.1)
13
14.2
Alarm log
(3.2) 13
15.
Settings
(4)
14
15.1
Tank settings
(4.1)
14
15.2
Booster pump settings
(4.2) 15
15.3
Inputs and outputs
(4.3) 15
15.4
User-defined alarms
(4.4)
18
15.5
Product configuration
(4.5)
19
15.6
Modules installed
(4.6) 19
15.7
Basic settings, CU 372
(4.7) 19
16. Data communication 22
16.1 Ethernet 22
16.2 GENIbus 23
17. Maintenance 24
17.1 CU 372 24
17.2 Regular inspections 24
17.3 Integrated pressure vessel 24
18. Taking the RCME system out of operation 24
19. Technical data 24
19.1 Pressure 24
19.2 Temperatures
24
19.3 Relative air humidity 24
19.4 Sound pressure level 24
19.5 Enclosure class
24
19.6 Volume of buffer tank 24
19.7 Weight of RCME unit 24
19.8 Dimensions
24
20. Electrical data 24
20.1 Supply voltage 24
21. Fault finding
25
22. Disposal 25
Warning
Prior to installation, read these installation and
operating instructions. Installation and operation
must comply with local regulations and accepted
codes of good practice.
Warning
If these safety instructions are not observed,
it may result in personal injury.
Warning
If these instructions are not observed, it may lead
to electric shock with consequent risk of serious
personal injury or death.
Caution
If these safety instructions are not observed,
it may result in malfunction or damage to the
equipment.
Note
Notes or instructions that make the job easier
and ensure safe operation.
Note
To ensure safe transport, we recommend that the
system is transported with suitable lifting tools.