Grundfos RCME Series, Инструкция по установке и эксплуатации

Страница: 19 / 120

English (GB)
19
15.5
Product configuration
(4.5)
Fig. 30
Product configuration
The setting in this display must be made according to the actual
system. Under normal conditions, the factory setting does not
need to be changed.
If the system is a complete Grundfos RCME system, select
"
RCME
".
If the system has been specially built for the specific application
and is controlled by a Grundfos "
Rainwater Control
", select
"
Rainwater Control
".
15.6
Modules installed
(4.6)
If the tick box in this display is checked, the number of inputs and
outputs will be increased if an IO 351B module is installed.
See section
15.3 Inputs and outputs (4.3)
.
Fig. 31
Modules installed
15.7
Basic settings, CU 372
(4.7)
In this menu, the basic settings of the CU 372 can be made:
• Activation of service language, English
•
Other settings related to CU 372
–
Display language
–
Units
–
Date and time
–
Password
for "
Operation
" and "
Settings
" menus
–
Ethernet
–
GENIbus number
–
Software status
.
Fig. 32
Basic settings, CU 372
Disp
la
y_4
.5
D
isp
lay_4
.6
D
is
pl
a
y_4
.7
Note
If the service language is selected, the symbol
is shown in the upper right corner of all displays.