Grundfos RCME Series, Инструкция по установке и эксплуатации

Страница: 12 / 120

English (GB)
12
12.1.3
Digital outputs
(1.1.3)
This display shows the status of the individual digital outputs.
The factory configuration is shown in fig.
12 .
Example
The DO1 digital output on the CU 372 (designated terminal 71) is
linked to the output "
Open mains water valve
".
Fig. 12
Digital outputs
12.2
Usage statistics
(1.2)
This display shows statistics for the mains water valve and
booster pump.
Fig. 13
Usage statistics
13.
Operation
(2)
In this display, it is possible to change the operating status of the
mains water valve
, booster pump and the feed pump.
Furthermore, the emptying of the buffer tank can be initiated, for
example for service purposes. See also section
15.2 Booster
pump settings (4.2)
.
Fig. 14
Operation
14.
Alarm
(3)
From this display, it is possible to access a list of current alarms
and the alarm log.
Fig. 15
Alarm
D
isp
lay_1
.1.
3
D
is
pl
a
y_1.
2
Note
In case of an interruption of the power supply,
the system will be started with the settings most
recently made.
D
is
pl
a
y_2
Di
sp
la
y_
3