3
English (US)
2. Limited warranty
Products manufactured by GRUNDFOS PUMPS CORPORATION
(Grundfos) are warranted to the original user only to be free of
defects in material and workmanship for a period of 24 months
from date of installation, but not more than 30 months from date
of manufacture. Grundfos' liability under this warranty shall be
limited to repairing or replacing at Grundfos' option, without
charge, F.O.B. Grundfos' factory or authorized service station,
any product of Grundfos' manufacture. Grundfos will not be liable
for any costs of removal, installation, transportation, or any other
charges which may arise in connection with a warranty claim.
Products which are sold but not manufactured by Grundfos are
subject to the warranty provided by the manufacturer of said
products and not by Grundfos' warranty. Grundfos will not be
liable for damage or wear to products caused by abnormal
operating conditions, accident, abuse, misuse, unauthorized
alteration or repair, or if the product was not installed in
accordance with Grundfos' printed installation and operating
instructions.
To obtain service under this warranty, the defective product must
be returned to the distributor or dealer of Grundfos' products from
which it was purchased together with proof of purchase and
installation date, failure date, and supporting installation data.
Unless otherwise provided, the distributor or dealer will contact
Grundfos or an authorized service station for instructions. Any
defective product to be returned to Grundfos or a service station
must be sent freight prepaid; documentation supporting the
warranty claim and/or a Return Material Authorization must be
included if so instructed.
GRUNDFOS WILL NOT BE LIABLE FOR ANY INCIDENTAL OR
CONSEQUENTIAL DAMAGES, LOSSES, OR EXPENSES
ARISING FROM INSTALLATION, USE, OR ANY OTHER
CAUSES. THERE ARE NO EXPRESS OR IMPLIED
WARRANTIES, INCLUDING MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE, WHICH EXTEND BEYOND
THOSE WARRANTIES DESCRIBED OR REFERRED TO
ABOVE.
Some jurisdictions do not allow the exclusion or limitation of
incidental or consequential damages and some jurisdictions do
not allow limit actions on how long implied warranties may last.
Therefore, the above limitations or exclusions may not apply to
you. This warranty gives you specific legal rights and you may
also have other rights which vary from jurisdiction to jurisdiction.
3. Product introduction
3.1 Introduction
As standard, Hydro Multi-B booster systems consist of two to
three CM(E) pumps coupled in parallel and mounted on a
common base frame with all the necessary fittings and a control
cabinet.
Fig. 1
Front view of Hydro Multi-B booster system
Fig. 2
Back view of Hydro Multi-B booster system
T
M
05
86
32
25
13
TM
05
86
33
25
13
Pos. Description
Quantity
1
Control cabinet
1
2
Suction manifold (316 SS)
1
3
Discharge manifold (316 SS)
1
4
Isolating valve (Nickel Plated Brass)
2 per pump
5
Non-return valve (Polyacetal (POM))
1 per pump
6
Pump (CME A-version CI/304 SS)
2-3
7
Base frame (304 SS)
1
8
Pressure transmitter and pressure gauge
1
9
Inlet pressure switch and pressure gauge
1
10
Oval flange connection (CME 3 - CME 10)
2 per pump
Intermediate adapter connection (CME 15)
1 per pump
11
Screw cap or blanking flange
2
12
Optional diaphragm tank
(available as an accessory)
n/a
