13
English (US)
9.3 Remote-controlled, external stop not activated
In this mode, the system is remote-controlled, and the external stop via digital input is not activated.
If local settings are to be changed, follow the flow chart examples below.
9.4 Remote-controlled, external stop activated
In this mode, the system is remote-controlled, and the external stop via digital input is activated.
If local settings are to be changed, follow the flow chart examples below.
T
M
05
92
87
36
13
Keep pressed for 3 seconds
See section
for
changing settings in local mode.
or
or
or
or
or
Note
Note
If the buttons are not touched for 3 seconds, the CU 323 will revert to the initial display.
TM
04
95
83
46
10
BUS
LOC
E
.
st
On
Off
On
Off
Keep pressed for 3 seconds
See section
for changing settings
in local mode.
or
or
or
or
Note
Note
If the buttons are not touched for 3 seconds, the CU 323 will revert to the initial display.
