Grundfos FB 10/40, Инструкция по установке и эксплуатации

Страница: 5 / 40

5
1. Introduction
1.1 Target group
This operating manual is intended for:
• the operators of the pump and
• maintenance and repair personnel.
It is assumed that all such personnel will have the basic
technical background required for the start-up, maintenance,
and repair of pump systems.
Sections for specially authorized personnel are indicated by a
preceding notation to this effect (such as chapter 6.).
1.2 Symbols and formatting
The following symbols and formats are intended to make it
easier to read this document:
• Listed items
Instructions
Instructions that must be carried out in a specific sequence
are numbered in the corresponding order.
*
Important information and helpful tips are identified with the
index finger symbol.
Safety instructions
The system used to identify safety instructions is described in
section 2.3 on page 6.
1.3 References to the document
Copyright
This document may not be copied, translated into other
languages, or made available to third parties without our
explicit written approval.
Technical changes
Design variants, technical data, and spare part numbers are
subject to technical change.
The right to make changes for the sake of further technical
development is reserved.
Overview
This section describes the requirements which are important for reading and understanding this manual. The
symbols and formats that make the reading easier are described.