Related information
4.4 Reduced performance under certain conditions
12.3.5 UL fuses and conductor cross-sections to mains and motor,
for installations in North America
5. Mechanical installation
The individual CUE cabinet sizes are characterised by their
enclosures. The table in the technical data section shows the
relationship between the enclosure class and enclosure type.
Related information
5.1 Enclosure types
Products with integrated STO function must be installed in an IP54
cabinet according to IEC 60529 or in an equivalent environment. In
special applications, a higher IP degree may be necessary.
5.2 Space requirements and air circulation
The CUE units can be mounted side by side, but as sufficient air
circulation is required for cooling, these requirements must be met:
•
Sufficient free space above and below the CUE cabinet. See the
table below.
•
Ambient temperature up to 50 °C (122 °F).
•
The CUE cabinet must be hung directly on the wall or fitted with
a back plate.
TM038859
CUE hung directly on the wall or fitted with a back plate
Required free space above and below the CUE cabinet:
Enclosure
Space [mm (in)]
A2, A3, A4, A5
100 (3.9)
B1, B2, B3, B4, C1, C3
200 (7.9)
C2, C4, D1h, D2h, D5h, D7h
225 (8.9)
5.3 Mounting
The user is responsible for mounting CUE securely on a
firm surface.
1. Mark and drill holes.
2. Fit the screws at the bottom, but leave loose. Mount CUE, and
tighten the four screws.
b
a
a
b
TM038860
Drilling holes in the wall
Related information
12.5.1 Enclosures A2-A5, B1-B4 and C1-C4
5.4 Mounting on the floor
WARNING
Crushing of feet
Death or serious personal injury
‐
CUE is very heavy and may fall over if the pedestal is
not anchored to the floor.
The user is responsible for mounting CUE securely on a
firm surface.
See the pedestal-kit instructions for further information.
By means of a pedestal (optional), CUE can also be mounted on
the floor.
1. Mark the mounting holes on the floor. See the figure below.
2. Drill the holes.
3. Mount the pedestal on the floor.
4. Mount CUE on the pedestal using the enclosed screws.
7
English (GB)
