Grundfos CONTROL MPC Скачать руководство пользователя страница 51 | Manualshive

Страница: 51 / 68

background image

English (GB)

51

8.7.47 Measurement, inlet pressure (4.4.1.2)

Fig. 97

Measurement, inlet pressure

Description

Dry-running protection can take place by means of a pressure
transmitter measuring the inlet pressure.
It is possible to set two levels:
• Warning
• Alarm + stop.
Restarting and resetting of alarms can be set to be automatic or
manual.

Setting range

• Selection of analog input for the function.
• Inlet pressure level for warning.
• Inlet pressure level for alarm + stop.
• Restarting: Auto / Manual.

Setting via control panel

• Settings > Monitoring functions > Dry-running protection >

Measurement, inlet pressure> Go to setting of analog input.
Display

Analog inputs (4.3.8)

appears.

1. Select: Inlet pressure.
2.

.

3. Select: Enabled.
4. Select and set the level:
• Warning.
• Alarm + stop.
5. Select resetting: Auto / Manual.

Factory setting

The setting is done in the start-up wizard and depends on the
application.

8.7.48 Measurement, tank level (4.4.1.3)

Fig. 98

Measurement, tank level

Description

Dry-running protection can take place by means of a level
transmitter measuring the level in a tank on the suction side.
It is possible to set two levels:
• Warning
• Alarm + stop.
Restarting and resetting of alarms can be set to be automatic or
manual.

Setting range

• Selection of analog input for the function.
• Tank level for warning.
• Tank level for alarm + stop.
• Restarting: Manual or automatic.

Setting via control panel

• Settings > Monitoring functions > Dry-running protection >

Measurement, tank level > Go to setting of analog input.
Display

Analog inputs (4.3.8)

appears.

1. Set the input to "Tank level, suction side".
2.

.

3. Select: Enabled.
4. Select and set the level:
• Warning.
• Alarm + stop.
5. Select resetting: Auto / Manual.

Factory setting

The function is disabled.

Note

If one of the levels is not required, the level value
must be the minimum value of the inlet-pressure
transmitter. This disables the function.

«
...
49
50
51
52
53
...
»

Содержание CONTROL MPC





































































Отзывы:

Нет отзывов

Похожие инструкции для CONTROL MPC

SolarCell Remote

Бренд: Samsung Страницы: 2

Бренд: Samsung Страницы: 20

Бренд: Febco Страницы: 12

Бренд: Game ready Страницы: 21

Бренд: VAMP Страницы: 304

Бренд: National Instruments Страницы: 21

Бренд: National Instruments Страницы: 6

Бренд: National Instruments Страницы: 10

Бренд: National Instruments Страницы: 6

Frigolink FVB110B

Бренд: WURM Страницы: 4

Бренд: PUTCO Страницы: 2

Бренд: Dejero Страницы: 24

Бренд: TradeQuip Страницы: 9

Бренд: WINDY NATION Страницы: 16

Бренд: Kaba Mauer Страницы: 10

Бренд: TeleMann Страницы: 4

Бренд: M-system Страницы: 7

Бренд: Carel Страницы: 48

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды