INSTRUCTIONS FOR USE
ROTARY BOOSTER PUMP - 3:1
RB-3
Piece Count:
1. Pump Body
2. Crank Fitted with Pump Handle
3. Bung Nut with 2” threads
4. Discharge Spout
5. Suction Tube
6. Discharge Hose Assembly (Includes hose, hose
spring, nozzle & hose clamp)*
*Optional, included only on select models
LOCK
LATCH
PUMP
BODY
PUMP
OUTLET
BUNG NUT
SUCTION
TUBE
PUMP
HANDLE
CRANK
NOZZLE
HOLDER
DISCHARGE
SPOUT
NON-RETURN
VALVE
(OPTIONAL)
GEAR
BOX
Features:
1.
Geared Rotary barrel pump with 3 times discharge per
rotation. For every complete handle turn ,the rotor turns
3 times
2. Dual directional Operation allows the pump to both empty,
as well as refill containers
3. Compact design, Ideal for use where volume fuel
dispensing
is needed, such as construction sites, workshop ,aviation,
farms/ ranches, boat etc.
4. Professional Die Cast Aluminum construction with Die Cast
Zinc rotor & vanes
5. Non wearing sintered gears
6. Crank Shaft mounted on ball bearings
7. Die Cast Aluminum handle with security locking latch
8. Horizontal Discharge outlet (easily connects to a Fuel Filter)
9. Fits 15 to 55 gallon (50 - 205 litre) drums
10.Dispenses 10 litres (2.60 gl.) per 20 turns
HOSE ASSEMBLY
(OPTIONAL)
SPRING
GUARD
DISCHARGE
NOZZLE
Intended use with :
Gasoline, Diesel, Kerosene etc. Works with most
petroleum based media & lubricating oils upto SAE 90
Do Not use with:
Corrosive media, solvents, acids, alkalis etc
Wetted components:
Steel, Aluminum, Zinc, NBR, PVC Nitrile **, Polyacetal***
**on models with hose
*** On models with non-return at inlet of suction tube
Assembly & Operation:
1. Fasten the discharge spout into the pump outlet . Use a thread sealant for a leak proof connection. For pump
models supplied with hose assembly ,connect the hose assembly to the end of the discharge Spout using
the hose clamp
2. Loosen the grub screw on the crank & connect the crank to the crankshaft. Secure the connection by tightening
the grub screw. Make sure that the grub screw fits onto the depression in the crankshaft
3. Assemble the suction tube parts, depending on the drum with which the pump is to be used. All 3 parts must be
connected for use with 55 gallon / 205 litre drums. It is good practice to use a sealant such as Teflon in
connecting the suction tube parts for a totally leak-proof connection. Select models may come with a telescopic
suction tube. Such a tube needs no assembly and will automatically adjust to the drum length
4. Slide the 2” bung nut onto the suction tube from the top end
