Main
function
Operation
Instruction
Model#: 20281-000
LIMITED WARRANTY
1) Do not disassemble the product.
2) Only use the power adapter provided with the product.
3) Altering or modifying the lamp in any way will render the product
unsafe.
4) Do not use the lamp fixture if the power cord is cut or damaged.
5) Do not use the lamp fixture if the power plug is bent or broken.
6) Do not use the lamp fixture if any part of it breaks.
7) Do not look at the LED light source directly.
8) Indoor use only.
9) Do not use the lamp in high-temperature or high humidity
environments. This product is NOT waterproof.
10) Do not cover this product.
11) The lamp fixture is not designed to support, additional weight.
Do not hang any object from any part of lamp.
12) Avoid exposure to direct sunlight or heat vent. This could cause
discoloration or damage to the lamp fixture.
13) Place the lamp on a stable, level surface.
This lamp has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment on and off, the user is encouraged to try to correct the
interference by one or more of the following:
Reorient or relocate the receiving antenna.
Increase the separation between the lighting unit and receiver.
Connect the lighting unit into an outlet on a circuit other than the outlet
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for assistance.
FCC
statements
Caution
Growth Product, LLC. warrants all of its lighting
fixtures against defects in materials and workmanship
for one (1) year from the date of original purchase.
Electronic parts including passive infrared devices,
photoelectric switching mechanisms, and light bulbs
provided with Growth products are warranted for
30 days from the date of original purchase.
This warranty does not cover parts becoming
defective due to misuse, accidental damage,
improper handling and/or installation and specifically
excludes liability for indirect, incidental or
consequential damages. Product found to be
defective may or may not be replaced with same or like
type product, contingent on the nature of the defect,
and or replacement availability and or compensated
for at a pro-rated value. This warranty gives you
specific rights and you may also have other rights,
which vary from state to state. Proof of purchase is
required to exercise the warranty.
Care And
Maintenance
Clean this unit periodically. Clean the finish surface using a dry soft cloth.
Do not use abrasive cleaners or a metal scouring pad as it may mar
the surface.
LED Desk Lamp
Touch Dimming
Color Temperature Control
Adjustable LED Head
Wireless Wave On/Off Control
1) Insert the lamp post into the base and secure with the screw
supplied using a screwdriver (not included).
2) Insert the lead of the power adaptor to the DC input
jack of lamp. Then connect the wall plug adapter to the
electrical outlet.
3) Please use the following keys for lamp operation
Press and hold to increase the brightness.
Press and hold to decrease the brightness.
1.Press to adjust the colour temperature
2800-3300K(Warm)
4500-5000K(Neutral)
6000-6500K(Cool)
2.Keep touching the key for 3 second to
turn on or turn off the light.
Position Adjustment: Please see the below diagrams for the
full range of positions available.
When joints are loose,please
gouge out the CD thread trim
cover with a thin medal,then
tighten the screw with a
screwdriver
Power adapter
When joints are loose,please
gouge out the CD thread trim
cover with a thin medal,then
tighten the screw with a
screwdriver
Motion sensor
OFF
ON
Motion sensor
OFF
ON
136°
116°
50°
