18
113463_64_65HBC Revision date: 08.27.19
6
COVER INSTALLATION – continued
6. With material weighted down along one frame side, have assistants carefully roll or fold material from free end up to peak. Keep cover tight and square on
frame during this process. Rolling cover toward peak allows easier access to complete next step.
(Stabilizer bar is not shown in diagrams below.)
7. Choose fastening option shown below for frame cover material.
Solid Black/Silver Cover (B):
Diagrams show attaching aluminum bar
(110155) through cover and into peak purlin of frame. Install Tek screws
approximately 17" on-center throughout length of frame.
Clear Film Cover (C):
Diagrams show securing film to u-channel using
spring wire.
Wear safety glasses and gloves. Be careful during spring
wire installation. Wire can damage cover and cause injuries. Install
with caution!
8. Continue by attaching cover conduits to edges of cover.
17" oc
Aluminum Bar
Weights
Ground Level
Weighted side of cover
.
Cover Installation – Blackout Material (B) & Film (C)