Page 1 of 4
GrowersSolution.com
931.528.3390
DAKOTA GREENHOUSE INSTALLATION
!!!! CAUTION: Tubing ends may be sharp!!!
Read directions completely before beginning assembly.
We recommend that you visit The Learning Center at
, click on How to Assemble under categories. In this section you will find video tutorials
to assist you with the assembly of your new greenhouse. If you have ANY questions please give us a call at
866-928-3390.
Step 1 – Ground Stakes
Square the corner stakes with each other. Take all
measurements on the outer edge of pipe.
Drive Corner stakes 18 inches in ground and then drive rest of
stakes
4 ft. centers
(Fig 1.1).
NOTE:
Use a large bolt and washer, or 2 x 4 on top of stakes to drive
them into the ground.
Fig 1.1 Ground Stakes
Step 2 – Bow Assembly
Place bow sections on flat ground.
Slide sections together (Fig 2.1), and secure at joints with
self-
tapping
screws that are provided (Fig 2.2).
Measure up each end of bow 6 inches and make a reference
mark. The mark is how far the bow slides into the ground stake.
Each bow is 7 pieces total; 3 angular, 2 side wall uprights, and 2
gable pieces.
Fig. 2.1
Fig 2.2 Bow Assembly
