Growcol GHyper 3000 Скачать руководство пользователя страница 25 | Manualshive

Страница: 25 / 52

Growcol GHyper 3000 Скачать руководство пользователя страница 25

21

6

Electrical Connection

This chapter mainly describes the cable connections of the system.

•

Prior to any electrical connections, keep in mind that the inverter has dual
power supplies.

•

It is mandatory for the qualified personnel to wear personal protective
equipments (PPE) during the electrical work.

Danger to life due to a high voltage inside the inverter!
• The PV string will generate lethal high voltage when exposed to sunlight.
• Before starting electrical connections, disconnect the DC and AC circuit breakers
and prevent them from inadvertent reconnection.
• Ensure that all cables are voltage free before performing cable connection.

• Any improper operations during cable connection can cause device damage or
personal injury.
• Only qualified personnel can perform cable connection.
• All cables must be firmly attached, undamaged, properly insulated and adequately
dimensioned.

• Comply with the safety instructions related to the PV strings and the regulations
related to the utility grid.
• All electrical connections must be in accordance with local and national standards.
• Only with the permission of the utility grid, the inverter can be connected to the
utility grid.

«
...
23
24
25
26
27
...
»

Содержание GHyper 3000





















































Отзывы:

Нет отзывов