background image

Growatt Shine3G

Quick Installation Guideline

Search “Shine Phone” in google play or app store, or scan 

the picture below, download and install the app. 

Register and Add device

For more info, please download from http://server.growatt.com

NOTE: 1.Please install the latest version;

              2.For more details, please refer to the content on 

                  server.growatt.com.

 

Android&

iOS

+86 755 2747 1942

+86 755 2747 2131

[email protected] 

Growatt ShineGPRS

SIM card installation procedure

Note: 1. If there is SIM card in the data logger, ignore this step.

           2. Don’t touch other parts on the PCB board. 
Remove the waterproof gasket, unscrew the screws, then open the shell 

and take out the PCB board, install the SIM card, put the PCB board into

 its shell, tighten the screws and put on the waterproof gasket.

 

Step2.

A If there is a DIP switch next to the RS232 port, please set 

    DIP 1 to 

. Then plug in the Shine3G/ShineGPRS  and 

    lock screws. 
B If there is no DIP switch, poke the small rubber plug from the 

   screw hole adjacent to the RS232 port. Plug into the RS232 

   port and lock screws.

 

“ON”

Electrical Connection

Step3.

1.Connect your mobile phone to the WiFi of the router.

3.Then enter the SN and check code of the Shine3G/

   ShineGPRS  or just scan the QR code on it in the following 

   page  to add Shine3G/ShineGPRS  into this account.

4.The successful registration, login account go to "My power 

    plants, click" + “on 

to view the acquisition whether 

    online access;

top right 

5. Then click the “Device” tab at the bottom line to move to 

    “Device” page, All detailed information of the PV system 

     can be viewed here. 

Remark:

The connection status of the 

 can be checked by the status of the blue LED light 

beside the Key button in the 

1. Blue LED status indicator:

Steady:Device Initialization

Off:No device found on RS232 port

Flash (0.2s cycle changes): Found device on RS232 port 

Slow flash (1s cycle changes): The network communication 

normal
2. Press KEY button of the Shine3G/ShineGPRS more than 6s 

to restore the factory settings, short press the KEY button to 

restart it.

Shine3G/ShineGPRS

Shine3G/ShineGPRS

2.Run the ShinePhone, register users, fill in the user information;

Отзывы: