Grove - Slide Potentiometer
The
Grove - Slide Potentiometer
module incorporates a linear variable resistor with
a maximum resistance of 10K
Ω
. When you move the slider from one side to the
other, its output voltage will range from 0 V to the Vcc you apply. It connects to the
other Grove modules through a standard 4-Pin
. Three of the pins are
connected to OUT (Pin 1), Vcc (Pin 3) and GND (Pin 4), while the fourth pin (Pin 2) is
connected to a on-board green indicator LED. The LED is used to visually represent
the resistance change on the potentiometer.
Features
o
30 mm long slide length
o
Linear resistance taper
o
Grove compatible
Specifications
Item
Min
Typical
Max
Voltage (DC)
3.3V
5.0V
30V
Current
-
-
30mA
Dimension
24mm x60mm
Net Weight
8.6g
Rotational life
>15,000 cycles
