Description:
Test Procedures:
®
The
ZeroStat MTR-1000
Resistance-Resistivity-Humidity-Temperature
Test kit is an easy to operate, compact, lightweight, portable meter
designed to measure temperature, humidity, and electrical
resistance/resistivity. Using both internal and external test probes, the
meter will measure resistivity, resistance between two points, and
resistance to ground according to EOS/ESD Association Standards, -
S4.1, S6.1, S7.1, S11.11, and European Standard CECC-EN 1000/15.
®
The
ZeroStat MTR-1000
is designed and
manufactured in the USA to allow
accurate measurements for engineers,
designers, quality control departments,
incoming inspectors and
sales/manufacturing personnel.
Industries where the meter can be
applicable include electronics, defense,
maintenance, medical, photographic,
printing, and other industries where
accurate temperatures, humidity, and
resistance measurements are required.
Specific industries which require accurate
measurements will dictate the correct test
procedures. The procedure outlined in
the Product Test Bulletin is specifically
used in the electronics industry where the
EOS/ESD and CECC procedures
predominate. It is recommended that
other industry procedures may be more
appropriate for your industry. These may
include MIL-HDBK-263, EIA-1S-5-A, ASTM D-257, and ASTM F-150. Failure
to measure relative humidity and temperature at the time of testing is in
non-compliance with ANSI/ESD-S4.1, S7.1. and S11.11
All materials must be tested on an insulated surface to avoid misleading
measurements. It is possible to measure down through the surface and
not along the surface. This is especially true with non-homogeneous or
multilayer materials. It is possible to actually measure down through the
dissipative surface layer and along the inner conductive surface and back
up through the dissipative layer. This is why it is not technically correct to
include a surface measurement value for two layer materials. Always
measure material thickness when measuring electrical properties because
thickness, temperature, and relative humidity can and will affect the
resistance/resistivity readings.
Meter Test Kit Contents:
CAUTION:
®
1
ZeroStat MTR-1000 Resistance-Resistivity-
Humidity-Temperature Meter
1
Blow Molded, Foam-Lined Travel Case
1
Concentric Ring Probe (optional)
2
5lb, 2.5 inch Diameter Test Probes.
2
Coil Cord 6 foot Test Grounding Leads
1
Grounding Clip
1
9 volt Battery
1
Product Instruction Bulletin
1
AC Power Adapter
1
NIST Certificate of Calibration
As with all high quality test equipment proper storage and use
of the ZeroStat MTR-1000 is required.
Because the AC power adapter will charge the battery, ONLY
USE a rechargeable battery when operating the AC adapter
with this meter
.
Ground Zero Electrostatics
MTR-1000 Megaohmmeter
th
4916 26 Street West, Suite 100, Bradenton, Florida 34207
877-
(463-1376),
941-751-7581
1-941-751-7586
Toll Free
GND-ZERO
Direct Phone
Fax
Email
Http://www.gndzero.com
®
ZeroStat MTR-1000 Megohmmeter
Digital Resistivity/Temperature/Humidity Meter
