Page 15
Terminal Setup
Info
Selecting this option displays the current network settings. An example
of the information provided is shown below:
Interface
: On-Board LAN
Status
: Connected
Mode
: DHCP
MAC
: 00:01:ce:01:08:bc
IP Address
: 172.016.046.054
Netmask
: 255.255.252.000
Gateway
: 172.016.044.255
DNS1
: 172.016.047.001
DNS2
: 172.016.047.002
Interface
This option sets the selection network connection method:
On-Board LAN
: Hard-wired Ethernet connection
USB Wireless LAN
: Wi-Fi connection using optional USB adaptor.
After selecting this option, the user must configure the connection
method.
DHCP
: Select for dynamically supplied IP address.
SSID
: After scanning, allows selection of the Wi-Fi networks
available.
Key Management
: Allows the entry of a WPA-PSK type key where
network encryption/protection is used.
DHCP
Select this if the terminal is to be dynamically supplied with an IP
address from a DHCP server as opposed to having to enter a static IP
address.
For static IP, the following settings need to be configured:
IP address
Subnet mask
Gateway address
Primary and secondary DNS servers
IT31 Network
These values configure the terminal’s network settings:
