The GINA
18
Da
te of
is
sue :
Sept
ember
2012
Automatic Greasing System
TriPlus Trailer
F212157R02
3.
The GINA
3.1
Introduction
The GINA (
G
roeneveld tester for
In
stallation and
A
nalysis) is a programming and read-out device
for the digital control unit of the TriPlus automatic greasing system.
Figure 3.1
The GINA
In the description that follows all screens of the GINA are dealt with in the order in which they have
been placed in its menu system. To get acquainted with the menu system and the features the GINA
offers, we advise you to follow the sequence as presented, if only once. In practise there is, of
course, no reason whatsever for such a rigid and time consuming approach.
The read-outs and setting have been grouped in three menus: main menu, para-meters timer and
diagnosis menu. You can access each of these menus by pressing <MAIN>, <PARAMETERS> or
<DIAGNOSIS> on the keypad of the GINA.
You can do so at any time, regardless of the screen currently shown on the display.
Some screens just show information. You cannot change anything in those screens. Other screens
allow you to change parameters or the status of a particular input or output. You can recognise
those screens by the blinking cursor that appears on them (with the exception of the system
configuration and error-logging-reset screens).
A number of screens show the current time in their top-right corner. In the screens, as reproduced
in this manual, this is indicated by
hh:mm:ss
.
Values are usually denoted to by a number of
x
-signs, with one ‘
x
’
for every possible digit in the
number.