Automatic Greasing System
TriPlus Trailer
Description components
15
Date of
is
sue :
Sept
e
m
ber
2
012
F212157R02
2.8
The distribution blocks
2.8.1
Properties
TriPlus distribution blocks distribute the grease to the various grease points and meter-out the
amount of grease that goes to each individual grease point. They do so in a progressive, sequential
way. The progressive distribution blocks in the greasing system distribute the grease to the grease
points, one grease point at a time, and one grease point after another. Progressive distribution
blocks can be placed in series, in which case an output of a block is used to feed the next block in
line (through a primary grease line).
2.8.2
Composition
A progressive distribution block comprises the
following components:
1.
a start-segment
2.
an end-segment
3.
at least three doser segments
The doser segments to be deliverable in several
versions with several amounts (quantity of grease
which by cycle it is supplied). By several doser
segments in a distribution block combine can a certain
partitioning of the grease be obtained.
Figure 2.5
Distribution block
Each doser segment always has two grease output ports, with identical grease outputs per cycle.
The grease channels between the segments are sealed by O-rings and the segments are pressed
together with two compression bolts.