Grizzly T10745, Руководство пользователя

Страница: 12 / 20

Model T10745
1
⁄
2
" x 18" Belt Sander -10
-
When the sanding belt loses its effec-
tiveness, is damaged, or shows signs of
excessive wear, it must be replaced.
to replace the sanding belt:
1. disCoNNECt
saNdEr FroM
poWEr!
2. push arm back (see figure 8) until it
clicks and locks.
4. place sanding belt over front and rear
drive wheels, making sure arrow on
sandpaper points toward front of arm
(see
figure 5).
5. Check that sanding belt sits between
drive wheel rims (see
figure 6) and is
centered over front wheel. this will help
ensure belt operates correctly.
figure 5. sanding belt installed.
drive
Wheel
figure 6. sanding belt installed between
wheel rims (cover removed for clarity).
figure 8. removing belt tension.
Body
3. remove sanding belt from wheels.
4. to install a new belt, refer to installing
belt on page 9.
6. press belt tension button (see figure
7) to tension sanding belt.
figure 7. Belt tension button location.
Belt tension
Button
replacing belt
Belt
Front
Wheel
arm
arrow
direction
rims