Grizzly T10745, Руководство пользователя

Страница: 10 / 20

Model T10745
1
⁄
2
" x 18" Belt Sander -8
-
this tool was carefully packaged for safe
transportation. remove the packaging
materials from around the tool and inspect
it. if you discover the tool is damaged,
please immediately call Customer Service
at (570) 546-9663 for advice.
save the containers and all packing mate-
rials for possible inspection by the car-
rier or its agent. otherwise, filing a freight
claim can be difficult.
When you are completely satisfied with
the condition of the shipment, inventory
the contents.
if any non-proprietary parts are missing
(e.g., a nut or a washer), we will gladly
replace them; or for the sake of expedi-
ency, replacements can be obtained at
your local hardware store.
section 3: set up
unpacking
inventory
this item presents serious injury
hazards to untrained users. read
through this entire manual to
become familiar with the controls
and operations before starting tool!
model t10745 inventory Qty
a. Belt sander ........................................1
b. sanding Belt
1
⁄
2
" x 18" .......................1
figure 2. Model t10745 inventory.
a
B
to test run the sander:
1. insert plug into a matching 120V outlet.
2. Move the black switch (located on the
handle of the sander) to the “
I
” posi-
tion to turn the sander
ON. Move the
switch to the “0” position to turn the
sander
OFF.
the sander should run smoothly. strange
or unusual noises should be investigated
and corrected before operating further.
if you cannot easily locate the source of
an unusual noise or vibration, contact our
technical support for help.
test run