Specifications
Maximum Cut Length ..................................... 12"
Cutting Capacities (Thickness):
Steel ................................................... 0.020"
Aluminum............................................ 0.050"
Brass .................................................. 0.025"
Weight .......................................................28 lbs.
MODEL T10051
12" BENCH SHEAR
INSTRUCTIONS
Figure 1.
Model T10051.
If you need help with your new item, call our Tech
Support at: (570) 546-9663.
CopyrighT © oCToBer, 2008 By grizzLy induSTriAL, inC.
WARNINg: NO pORTION OF THIS MANUAL MAy BE REpRODUCED IN ANy SHApE
OR FORM WITHOUT THE WRITTEN AppROvAL OF gRIzzLy INDUSTRIAL, INC.
#jB11263 prinTed in ChinA
Damage to your eyes and hands could result
from using this tool without proper protec-
tive gear. Always wear safety glasses and
heavy gloves when operating this machine.
1. Overloading this tool can cause injury
from flying parts if the tool breaks. Do
not exceed the tool capacities.
2. NEvER operate the bench shear with-
out the plastic safety guard in place.
4. Always chamfer and de-burr sharp
sheet metal edges before bending in
the bench hand brake. Sharp edges on
sheet metal can result in severe cuts.
5. NEvER place your hands between the
blades of the shear.
6. Always wear leather gloves and
approved safety glasses when using
this machine.
7. Inspect the bench shear for any cracked
components or loose fasteners. Correct
any problems before use. Loose hard-
ware or cracks could result in sudden,
unexpected movements during use.
8. DO NOT allow children to play with the
bench shear.
9. If at any time you are experiencing
difficulties performing the intended
operation, STOp using the tool and
contact our Technical Support at (570)
546-9663, or ask a qualified expert how
the operation should be performed.