Grizzly H8369, Инструкция по эксплуатации

Страница: 1 / 6

Specifications
Power Requirement .....................................110V
Air Pressure Requirement ........................ 90 PSI
Speed ................................................. 3000 RPM
Torque ...................................................135 ft/lbs
Inventory
Refer to
Figure 1
and the table below to inventory
the contents of the shipping box.
MODEL H8369
PNEUMATIC POWER
DRAWBAR
INSTRUCTIONS
COPYRIGHT © MARCH, 2008 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#TS10501 PRINTED IN TAIWAN
If any nonproprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
If you need help with your new pneumatic power
drawbar, call our Tech Support at: (570) 546-
9663.
REF PART # DESCRIPTION
1 PH8369001 PNEUMATIC MOTOR
2 PH8369002 MOTOR COVER
3 PH8369003 CONTROL ASSEMBLY
4 PH8369004 AIR HOSE W/CONNECTORS
5 PH8369005 AIR REGULATOR/FILTER/LUBRICATOR
6 PH8369006 DRAWBAR BOLT HEAD
7 PH8369007 DRAWBAR SHAFT 7/16-20 X 22
8 PH8369008 COMPLETE BOLT BAG
�
�
�
�
�
�
�
�
Figure 1. Model H8369 inventory.
Bolt Bag Contents Qty
Phillips Head Screws M4.7 x 10 ....................... 3
Cap Screws M6-1 x 10 ...................................... 2
Cap Screws M6-1 x 15 ...................................... 4
Cap Screws M6-1 x 20 ...................................... 3
Lock Washers 6mm ........................................... 3
Flat Washers 6mm ............................................ 2