Introduction
Add this powerful
3
⁄
8
" pneumatic drill to your toolbox
for unbelievable convenience and fully reversible
control. Producing 1,800 RPM, this compact drill
offers perfect power for metalworking, machining
or production woodworking applications. Features
an industrial quality keyed chuck. Weighs 3 lbs.
Inventory
A.
Reversable Air Drill .................................... 1
B.
Chuck Key .................................................. 1
Operation
Tool requires 90 PSI to operate correctly.
To improve tool lifespan, use a filter/lubricator/
regulator as shown in
Figure 2
. Otherwise, lubri-
cate daily with a couple drops of pneumatic tool oil
directly into the air fitting as shown in
Figure 3
.
MODEL G5351
3
⁄
8
" REVERSABLE
AIR DRILL
INSTRUCTION SHEET
Figure 1.
Model G5351.
Figure 3.
Lubricating directly into air fitting.
If you need help with your new pneumatic tool,
call our Tech Support at: (570) 546-9663.
COPYRIGHT © FEBRUARY, 2006 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#PC8008 PRINTED IN TAIWAN
EYE INJURY HAZARD!
Always wear safety glasses
during use to prevent
serious personal injury!
INJURY HAZARD!
Always disconnect tool from
air to prevent unexpected
operation during service!
EXPLOSION HAZARD!
Never exceed 120 PSI!
Quick
Connector
Quick
Coupler
Air Hose
Quick
Coupler
Quick
Connector
Lubricator
Filter
Regulator
Air
Compressor
Your
Tool
Figure 2.
Installing your tool.
