Grizzly G0925, Руководство пользователя

Страница: 42 / 44

-36-
Model G0925 (Mfd. Since 02/20)
BUY PARTS ONLINE AT GRIZZLY.COM!
Scan QR code to visit our Parts Store.
REF PART # DESCRIPTION REF PART # DESCRIPTION
101 P0925101 PINCH/SHOCK/ENTANGLEMENT LABEL 106 P0925106 ELECTRICITY LABEL - LARGE
102 P0925102 MACHINE ID LABEL 107 P0925107 MACHINE WARNING LABEL
103 P0925103 READ MANUAL/PPE LABEL 108 P0925108 TOUCH-UP PAINT, GRIZZLY GREEN
104 P0925104 GRIZZLY LOGO LABEL 109 P0925109 TOUCH-UP PAINT, GRIZZLY BLACK
105 P0925105 ELECTRICITY LABEL - SMALL 110 P0925110 MODEL NUMBER LABEL
Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes
off or becomes unreadable, the owner of this machine MUST replace it in the original location
before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com.
Labels & Cosmetics
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
ENTANGLEMENT
HAZARD!
Tie back long hair and
remove loose clothing
to prevent getting
caught in machine.
PINCH HAZARD!
Always keep this
cover closed during
operation.
G0925
EYE/FACE INJURY
HAZARD!
Always wear safety
glasses and face
shield when using
this machine.
To reduce risk of
death or serious
injury, read manual
BEFORE using
machine.
MODEL G0925
8" BENCHTOP
DRILL PRESS
Motor: 1/3 HP, 120V, 1-Ph, 60Hz
Swing: 8"
Spindle to Table Dist: 7-1/2"
Spindle to Base Dist: 10-13/16"
Spindle Travel: 0”–2"
Spindle Taper: JT33
Number of Spindle Speeds: 5
Spindle Speeds: 740–3140 RPM
Weight: 34 lbs.
Mfd. for Grizzly in China
Date
Specifications
Serial Number
WARNING!
To reduce the risk of serious injury when using this machine:
1. Read and understand owner’s manual before operating.
2. Always wear approved safety glasses.
3. Only plug power cord into a grounded outlet.
4. Disconnect power before setting up or servicing.
5. Avoid spindle entanglement. Tie back long hair, roll up long
sleeves, and DO NOT wear loose clothing, gloves, or jewelry.
6. Keep all guards and covers in place during operation.
7. Clamp workpiece to table to prevent rotation.
8. Avoid putting hands where they could slip into rotating bits.
9. Always remove chuck keys and other tools before starting.
10. Use correct speeds for drilling bits and workpiece material.
11. Do not expose to rain or use in wet locations.
12. Prevent unauthorized use by children or untrained users.
101
102
103
104
105
106
107
108
109
110