Grizzly G0923, Руководство пользователя

Страница: 16 / 56

-14-
Model G0923 (Mfd. Since 05/20)
SECTION 3: SETUP
Main Inventory (Figure 6) Qty
A. 3D Printer ................................................... 1
B. PLA Filament 1.75mm ................................ 1
C. USB Type B Cable ..................................... 1
D. Glue Stick ................................................... 1
E. Build Plate .................................................. 1
F. Bowden Tube (Spare Part) ......................... 1
G. Socket Wrench 6mm .................................. 1
H. Spool Hanger ............................................. 1
I. Power Adapter ............................................ 1
J. SD Card 8GB ............................................. 1
K. SD to USB Reader ..................................... 1
L. Power Cord ................................................. 1
Figure 6. Main inventory.
A
B
C
D
E
F
G H
I
J
K
L
Inventory
The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
This machine was carefully packaged for safe
transport. When unpacking, separate all enclosed
items from packaging materials and inspect them
for shipping damage.
If items are damaged,
please call us immediately at (570) 546-9663.
IMPORTANT: Save all packaging materials until
you are completely satisfied with the machine and
have resolved any issues between Grizzly or the
shipping agent. You MUST have the original pack-
aging to file a freight claim. It is also extremely
helpful if you need to return your machine later.
Unpacking