Grizzly G0923 Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 56

background image

Model G0923 (Mfd. Since 05/20)

-11-

Additional Safety for 3D Printers

Serious burns can occur from contact with the nozzle. Gas and ultrafine particles may be

released during operation. Avoid extended proximity to printer when printing in an enclosed

space. To reduce these risks, anyone operating this machine MUST completely heed the

hazards and warnings below.

ADEQUATE VENTILATION.  Filament  may  pro-
duce  ultrafine  particles  or  toxic  gasses.  Exact
health  risks  vary  depending  on  filament  used.
Make sure work area is adequately ventilated. PLA
filament is recommended to minimize health risks.

FIRE HAZARD. Do not leave printer unattended
for extended periods of time, and always stop
and unplug printer if printing error occurs. Ensure
smoke alarms are installed near printer and fire
extinguishers are easily accessible.

HOT COMPONENTS. When heated, nozzle and
heated build plate can burn immediately on con-
tact. Do not touch nozzle or build plate when hot.
Allow components time to cool before performing
maintenance.

MAINTENANCE/SERVICE. Always stop printer
and wait for parts to come to a stop before making
adjustments or servicing.

PINCH HAZARD. Do not reach into machine
or touch built plate during operation. Injury may
occur if operator comes into contact with moving
parts.

No list of safety guidelines can be complete.

Every shop environment is different. Always

consider safety first, as it applies to your

individual working conditions. Use this and

other machinery with caution and respect.

Failure to do so could result in serious per-

sonal injury, damage to equipment, or poor

work results.

Like all machinery there is potential danger

when operating this machine. Accidents are

frequently caused by lack of familiarity or

failure to pay attention. Use this machine

with respect and caution to decrease the

risk of operator injury. If normal safety pre-

cautions are overlooked or ignored, serious

personal injury may occur.

«
...
11
12
13
14
15
...
»

Содержание G0923

























































Отзывы:

Нет отзывов

Похожие инструкции для G0923

Pixma G1000 series

Бренд: Canon Страницы: 2

Pixma G1000 series

Бренд: Canon Страницы: 80

MultiPASS L6000

Бренд: Canon Страницы: 24

Laser Class 700 Series

Бренд: Canon Страницы: 221

Бренд: NCR Страницы: 206

Бренд: NCR Страницы: 138

Figure 4 Standalone

Бренд: 3D Systems Страницы: 2

Бренд: Oki Страницы: 80

Бренд: UEi Страницы: 4

Allen-Bradley ClearMark

Бренд: Rockwell Automation Страницы: 16

Бренд: Microcom Страницы: 207

Бренд: 3D Systems Страницы: 103

RXi HMI GFK-3233A

Бренд: Emerson Страницы: 20

Бренд: D-Link Страницы: 40

Бренд: weistek Страницы: 23

Бренд: Weidmüller Страницы: 420

Бренд: Renkforce Страницы: 4

Бренд: Riso Страницы: 5

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды