manualshive.com logo in svg

Grizzly G0866, Руководство пользователя, Страница: 9 / 100

Поделиться
Скачать
Grizzly G0866 Скачать руководство пользователя страница 9

Model G0866 (Mfd. Since 11/18)

-7-

The information contained herein is deemed accurate as of 3/29/2021 and represents our most recent product specifications.

Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.

PAGE 1 OF 3

Model G0866

MACHINE DATA

SHEET

Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901

MODEL G0866 37" 15 HP WIDE‐BELT SANDER WITH

INDUSTRIAL ROLLER

Product Dimensions:

Weight............................................................................................................................................................ 3417 lbs.

Width (side-to-side) x Depth (front-to-back) x Height........................................................................... 59 x 65 x 75 in.

Footprint (Length x Width)............................................................................................................................ 37 x 57 in.

Space Required for Full Range of Movement (Width x Depth).................................................................. 121 x 65 in.

Shipping Dimensions:

Type...................................................................................................................................................... Wooden Crate

Content........................................................................................................................................................... Machine

Weight............................................................................................................................................................ 3968 lbs.

Length x Width x Height....................................................................................................................... 72 x 63 x 85 in.

Must Ship Upright................................................................................................................................................... Yes

Electrical:

Power Requirement..................................................................................................... 220V or 440V, 3-Phase, 60 Hz

Prewired Voltage.................................................................................................................................................. 220V

Full-Load Current Rating............................................................................................... 79.8A at 220V, 40.5A at 440V

Minimum Circuit Size........................................................................................................ 100A at 220V, 50A at 440V

Connection Type........................................................................................... Permanent (Hardwire to Shutoff Switch)

Switch Type............................................................................................ Control Panel w/Magnetic Switch Protection

Voltage Conversion Kit........................................................................................................................... G440VG0866

Motors:

Main Front

Horsepower.............................................................................................................................................. 15 HP

Phase.................................................................................................................................................... 3-Phase

Amps............................................................................................................................................... 36.7A/18.4A

Speed................................................................................................................................................ 1760 RPM

Type........................................................................................................................................... AEEF Induction

Power Transfer ................................................................................................................................ Twin V-Belt

Bearings........................................................................................................ Sealed & Permanently Lubricated

Main Rear

Horsepower.............................................................................................................................................. 15 HP

Phase.................................................................................................................................................... 3-Phase

Amps............................................................................................................................................... 36.7A/18.4A

Speed................................................................................................................................................ 1760 RPM

Type........................................................................................................................................... AEEF Induction

Power Transfer .............................................................................................................................. Triple V-Belt

Bearings........................................................................................................ Sealed & Permanently Lubricated

Feed

Horsepower................................................................................................................................................ 2 HP

Phase.................................................................................................................................................... 3-Phase

Amps................................................................................................................................................... 6.4A/3.7A

Speed................................................................................................................................................ 1680 RPM

Type..................................................................................................................................................... Induction

Power Transfer .......................................................................................................................................... Gear

Bearings........................................................................................................ Sealed & Permanently Lubricated

Содержание G0866





































































































Отзывы:

Нет отзывов