Grizzly G0718, Руководство пользователя

Страница: 23 / 52

Model G0718 (Mfd. Since 12/10)
-21-
SECTION 4: OPERATIONS
Basic Controls
Refer to
Figure 24 and the following descriptions
to become familiar with the basic controls of this
machine.
A. ON/OFF Switch: Starts and stops motor.
B. Downfeed Handle: Raises and lowers bor-
ing bits for drilling operations.
C. Depth Adjustment Knob: Sets the maxi-
mum boring bit depth.
C
F
J
E
A
B
I
D
Figure 24. Model G0718 basic controls.
G
H
D. Swing Arm: Swings down after boring opera-
tion to install hinge.
E. Fence Stops: Mount anywhere along the
fence so holes can be drilled in multiple
workpieces at the same location.
F. Hold-Down Clamp: Secures the workpiece
firmly against the table and fence. Adjusts
to accommodate different workpiece thick-
nesses.
G. Table Fence: The two-piece fence supports
the workpiece during the boring operation.
The fence scale is used to position the
workpiece relative to the boring bits.
H. Fence Extension: Mounts on the left or right
end of the table fence for longer workpieces.
I. Throat Adjustment Knob: Adjusts the bor-
ing head bit position laterally.
J. Throat Position Lock: Locks the boring
head lateral position when adjusting the set-
back distance.
To reduce the risk of
serious injury when using
this machine, read and
understand this entire
manual before operating.
Damage to your eyes and lungs could result
from using this machine without proper pro-
tective gear. Always wear safety glasses and
a respirator when operating this machine.
NOTICE
If you have never used this type of machine
or equipment before, WE STRONGLY REC-
OMMEND that you read books, review
industry trade magazines, or get formal
training before beginning any projects.
Regardless of the content in this section,
Grizzly Industrial will not be held liable for
accidents caused by lack of training.