Grizzly G0702 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 32

Grizzly G0702 Скачать руководство пользователя страница 4

-2-

Model g0702 (Mfg. since 8/09)

INtRODuCtION

the Model g0702 disc Sander features a 1 hp,
120v,  1720  rpM  motor  equipped  with  a  motor
brake and a 12" diameter sanding disc. the preci-
sion  ground  cast  iron  table  is  cut  with  two  miter
slots  that  allow  for  an  included  miter  gauge  to
move  a  workpiece  in  either  an  X  or  y  direction
against  the  sanding  disc.  an  adjustable  miter
gauge provides a means for angle sanding. a built
in 2

1

⁄

2

" od dust port allows for dust collection. a

selection of adhesive sanding discs are available
through the grizzly catalog.

Machine Description

We  stand  behind  our  machines.  If  you  have
any  questions  or  need  help,  use  the  information
below to contact us. Before contacting, please get
the  serial  number  and  manufacture  date  of  your
machine. This will help us help you faster.

Grizzly Technical Support

1203 Lycoming Mall Circle

Muncy, PA 17756

Phone: (570) 546-9663

Email: [email protected]

We want your feedback on this manual. What did
you like about it? Where could it be improved?
Please take a few minutes to give us feedback.

Grizzly Documentation Manager

P.O. Box 2069

Bellingham, WA 98227-2069

Email: [email protected]

Contact Info

We are proud to offer this manual with your new
machine!  We've  made  every  effort  to  be  exact
with  the  instructions,  specifications,  drawings,
and  photographs  of  the  machine  we  used  when
writing this manual. However, sometimes we still
make an occasional mistake.

Also, owing to our policy of continuous improve-
ment,

your machine may not exactly match the

manual

. If you find this to be the case, and the dif-

ference between the manual and machine leaves
you in doubt, check our website for the latest
manual update or call technical support for help.

Before calling, find the manufacture date of your
machine by looking at the date stamped into the
machine  ID  label  (see  below).  This  will  help  us
determine  if  the  manual  version  you  received
matches the manufacture date of your machine.

For your convenience, we post all available man-
uals and manual updates for free on our website
at

www.grizzly.com

. Any updates to your model

of machine will be reflected in these documents
as soon as they are complete.

Manufacture Date

of Your Machine

Manual Accuracy

«
...
2
3
4
5
6
...
»

Содержание G0702

































Отзывы:

Нет отзывов