11
1. Plug in the Charger.
2. Open the Wi-Fi settings on your smart phone.
3. Select the network UC_Mini_Grizzle.
4. Open your mobile browser.
5. Enter the IP address 192.168.0.116 into the browser search bar.
6. A webpage will load with selection for the maximum current.
Adjust Maximum Current Through Web Browser
The Grizzl-E Mini Allows you to change the adjustable maximum circuit through the Wi-Fi
connected feature.
To set the Maximum Current :
7. Select the Parameters button.
8. Select the voltage based on the circuit rating.
Note:
The Web Browser Access Point is not able to set Maximum Current above the DIP
switch settings. Maximum Current settings equal to or less than the DIP switch settings will
show on the browser page.
