Griven GR0399, Инструкция по эксплуатации

Страница: 35 / 40

8.4 DMX functions
8.5 Options
1= NOT USED
2= NOT USED
3= NOT USED
4= NOT USED
5= NOT USED
6= Remote switch lamp On/Off -Lamp On/Off through the DMX controller.
Push the MENU button repeatedly until the display reads option 6 (see picture on the side). By using
the UP/DOWN buttons, option 6 can be set either to L (deactivated) or to H (activated).
Push ENTER to confirm.
7= NOT USED
8= Test- Test mode activation. Black out is closed when this option is set to OFF and dichroic filters are open.
Push the MENU button repeatedly until the display reads option 8 (see picture on the side). By using
the UP/DOWN buttons, option 6 can be set either to L (deactivated) or to H (activated).
Push ENTER to confirm.
9= NOT USED
8.6 Switching off the unit
Follow these instructions to switch off the unit:
• Before disconnecting the device, turn the lamp off through the DMX controller and then wait for 5 minutes the
fixture cooling.
• Turn off the main switch on the ballast unit
Channel Function Value Description
1 Lamp
0-127 Lamp ON
128-255 Lamp OFF
2
Blackout
Dimmer
Strobe
0-5 Shutter closed
1-127 Proportional controll of mechanical shutter from 0 to 100%
128-159 Shutter open
160-179 Strobe effect 1 Fps
180-199 Strobe effect 1.25 Fps
200-219 Strobe effect 1.5 Fps
220-239 Strobe effect 2 Fps
240-255 Shutter open
3 Yellow 0-255 Proportional controll of Yellow movement from 0 to 100%
4 Cyan 0-255 Proportional controll of Cyan movement from 0 to 100%
5 Magenta 0-255 Proportional controll of Magenta movement from 0 to 100%
6 Frost 0-255 Proportional controll of Frost movement from 0 to 100%
7 Zoom 0-255 Proportional controll of Zoom movement from 0 to 100%
English 35