Grinder CM100M, Руководство пользователя

Страница: 26 / 30

Beijing Grinder Instrument Co., Ltd. Tel
：
010-82363430 Fax
：
010-82363435 www.grindertech.cn
25
M1-6
M1-5
X
Y
LP
Third step
：
insert the rotor
Forth step
：
close and lock well the grinding room
Fifth step
：
fasten the collecting bucket
5.12 Universal hopper
（
fig 5.12
）
The universal hopper is suitable for large amount of samples
Operation of universal hopper
：
First step
：
pull out the lock pin LP horizontal
and raise up the feed hopper plug Y.
Second step
：
open the cover of funnel X
Third step
：
start the instrument
Forth step
：
Feed the samples from feed port.
Fifth step
：
Close the cover of hopper X
Sixth step
：
put down the hopper plug Y
fig 5.12
5.13 Standard hopper
（
Fig 5.13
）
The application for standard hopper

Cable waste

Abandoned carpets

similar materials like straw and grass.

Similar materials like tree branch.
Operating method of standard hopper
：
fig 5.13
First step
：
start CM100M
Second step
：
feed the samples into hopper.
Third step
：
push the samples with feed shovel Z into grinding chamber.
Note
：

Wear cut-resistant safety gloves when you feed some long size samples.

Only the hopper plug can be used to assist to feed the sample,the instrument and
parts will be damaged if use assist tools.

It’s possible to cause personal injure if allow many shapes samples entry into the
hopper.