manualshive.com logo in svg

Grimm Audio LS1, Руководство пользователя, Страница: 30 / 62

Поделиться
Скачать
Grimm Audio LS1 Скачать руководство пользователя страница 30

Hardware Remote

page 30

Hardware Remote

Programming the Hardware Remote / IR Remote

Some features of your LS1 Hardware Remote can be adjusted to suit your 

preference. The LS1 Remote also has the ability to learn infrared commands 

from all kinds of handheld IR remotes to control various settings. This 

means you can use a remote control you already own from another product 

to control the LS1 Remote. Supported IR formats include RC5, RC6 and Sony 

protocol. 

IR controllable settings are volume, input source selection, and mute.

To program the LS1 remote, press and hold the large dial. You will see three 

dots appear while you wait until the display briefly shows “

 ESE 

” (which 

stands for ‘Extra Settings’). Now you are in programming mode and you can 

release the dial. The display will show the control to be programmed. 

The first control is “

 bri 

“ or the brightness of the display. Alternating it shows 

the current setting. By turning the dial you can change this setting. 

The next menu item is selected by pressing the dial once more. You will then 

see “

 CAL 

”. This calibrates the “0.0” volume point of the LS1 remote. If you 

turn the dial clockwise it shows “

 SET 

”, meaning it has set the 0.0 point to the 

current playback volume level. If you turn the dial counterclockwise, the 

“

 def 

” indication tells you the 0.0 reference point has been set back to its 

default position.

By pressing the dial one more time you will see a “

 P 

” in the display, 

informing you that you are now in ‘Programming’ mode and the device is 

waiting to receive commands from your IR handheld remote. 

Содержание LS1































































Отзывы:

Нет отзывов