Grimm Audio LS1, Руководство пользователя, Страница: 23 / 62

If the edges of the cabinet and the leg don´t align perfectly you can now
untighten the knurled screw inside the leg just a little bit and align all
edges carefully by hand. The strong magnets provide a secure fit of the
legs to the cabinets, while still allowing tiny adjustments in all directions to
make them a perfect fit. If you are done aligning cabinet and legs gently
tighten the knurled screws. Again there´s no need to torque them down
too hard.
Next step is to put the covers on top of the legs, these are only held in
place by magnets and can also be aligned simply by hand.
These steps can now be repeated exactly with the second speaker. In the
next chapter we will have a look at all the connections and peripherals.
Now you can carefully set up the assembled LS1, as mentioned asking a
second person to help you is highy recommended.
Best is to directly place the LS1 close to the right spot in the room. If you
are on your own, the easiest way to carry the speaker is to stand behind it
and grab it underneath the bottom profile of the cabinet with both hands.
With two people the easiest way to carry the LS1 is to stand next to both
sides of the speaker and grab it underneath the bottom cabinet profile
from front and back, like this it is pretty easy to move the speaker to it´s
desired location.
page 23
Unpacking And Assembly
Unpacking And Assembly